![Van Tech Corner](/img/default-banner.jpg)
- Видео 206
- Просмотров 4 915 060
Van Tech Corner
Вьетнам
Добавлен 27 мар 2011
Welcome to Van Tech Corner - a small channel about Networking, Computer, IoT and Technology. I made tutorials (especially OpenWRT), review products and do some fun experiments on hardware.
If there is any question related to the tutorial or the topic, you can leave it in the comment section or post it on the community group (the link can be found on the channel page)
For business inquiry/ product review request, you can write to me at luong@dongvan.info
-----------------------------------------
Chào mừng đến với Van Tech Corner - một góc nhỏ về Mạng, Máy tính, IoT và Công nghệ. Tôi làm các video hướng dẫn (đặt biệt là OpenWRT), đánh giá sản phẩm và một vài thí nghiệm về phần cứng.
Nếu có bất kỳ câu hỏi nào liên quan đến bài hướng dẫn hoặc chủ đề, bạn có thể viết bình luận trên video hoặc tạo câu hỏi trong nhóm cộng đồng (liên kết có thể tìm thấy tại trang chủ)
Với những liên hệ kinh doanh hoặc yêu cầu đánh giá sản phẩm, bạn có thể email cho tôi tại luong@dongvan.info
If there is any question related to the tutorial or the topic, you can leave it in the comment section or post it on the community group (the link can be found on the channel page)
For business inquiry/ product review request, you can write to me at luong@dongvan.info
-----------------------------------------
Chào mừng đến với Van Tech Corner - một góc nhỏ về Mạng, Máy tính, IoT và Công nghệ. Tôi làm các video hướng dẫn (đặt biệt là OpenWRT), đánh giá sản phẩm và một vài thí nghiệm về phần cứng.
Nếu có bất kỳ câu hỏi nào liên quan đến bài hướng dẫn hoặc chủ đề, bạn có thể viết bình luận trên video hoặc tạo câu hỏi trong nhóm cộng đồng (liên kết có thể tìm thấy tại trang chủ)
Với những liên hệ kinh doanh hoặc yêu cầu đánh giá sản phẩm, bạn có thể email cho tôi tại luong@dongvan.info
GL-iNet Flint 2 - USB 3.0 Network Attach Storage (NAS) Throughput Test
In this video, we are going to test out the GL-iNet Flint 2 USB Network Attach Storage throughput with Samba 4 and CrystalDiskMark. At the time of making this video, the router runs GL-iNet stock firmware V4.6.2.
The GL-iNet Flint 2 (GL-MT6000) has a USB 3.0 port. This is perfect for Network File Sharing or adding LTE/5G connectivity. Some of you have requested to test the throughput/speed of the network drive, so, here it is.
For this test, I used the KIOXIA 128GB M.2 2230 PCIe NVMe, model KBG40ZNS128G and the ORICO Dual NVMe/SATA Dual Protocol SSD Enclosure ruclips.net/video/1irC6y4Nmqw/видео.htmlsi=bq2ajZYaJPutICEs. The device supports 10Gbps, but due to the limitation of both my PC'...
The GL-iNet Flint 2 (GL-MT6000) has a USB 3.0 port. This is perfect for Network File Sharing or adding LTE/5G connectivity. Some of you have requested to test the throughput/speed of the network drive, so, here it is.
For this test, I used the KIOXIA 128GB M.2 2230 PCIe NVMe, model KBG40ZNS128G and the ORICO Dual NVMe/SATA Dual Protocol SSD Enclosure ruclips.net/video/1irC6y4Nmqw/видео.htmlsi=bq2ajZYaJPutICEs. The device supports 10Gbps, but due to the limitation of both my PC'...
Просмотров: 674
Видео
OpenWrt - Raspberry Pi 5 handles 2.5Gbps smoothly (using USB 3.0 to 2.5GbE adapters)
Просмотров 5 тыс.Месяц назад
Sometime ago, I made videos about Raspberry Pi 5 runs OpenWrt snapshot. In this short video, I just want to update that the Raspberry Pi 5 can handle 2.5Gbps smoothly. Let's watch the video for more information. For this test, I used 2 x USB 3.0 to 2.5 Gigabit Ethernet adapters. It has Realtek RTL8156B chip and the driver package is kmod-usb-net-rtl8152. Please note that you need to add this pa...
GL-iNet Mudi V2 - Portable 4G LTE Router - Unbox & Review
Просмотров 2,1 тыс.2 месяца назад
GL-iNet Mudi V2 (GL-E750V2) is a portable 4G LTE router, designed for those who required a secure and stable internet connection on the go. Comes with Dual-band WiFi, LTE CAT4/CAT 6 modules, and powered by OpenWrt, the Mudi V2 will get you connected, no matter where you are. Do check out this video to find out more information. Video timeframe: 00:00 - Mudi V2 Intro 00:41 - Hardware & Software ...
GL-iNet Flint 2 - WiFi6 Throughput Test with FW V4.5.8 (Huge Improvement)
Просмотров 6 тыс.3 месяца назад
In this video, I will test the WiFi throughput of the GL-iNet Flint 2 (GL-MT6000) on the 2.4GHz channel and 5GHz channel. The tests were done with Firmware version V4.5.8, Hardware Acceleration enabled and all configurations on default. The client PC has the Intel® Wi-Fi 6E AX210 network adapter. There were reports that the 2.4GHz WiFi throughput of the Flint 2 is very bad in FW V4.5.6, and ind...
youyeetoo X1 SBC - Unboxing, Quick Overview and Booting up
Просмотров 2,3 тыс.4 месяца назад
youyeetoo X1 is an x86 Single Board Computer (SBC) which is powered by the Intel® Celeron 11'th Gen Jasper Lake N5105. It comes with soldered RAM and eMMC. You can select from 4GB, 8GB or 16GB of RAM to pair with No-eMMC, 64GB, 128GB and 256GB of eMMC. Besides typical Gigabit Ethernet port, M.2 port for NVMe/SATA SSD, the X1 SBC also allows you to access GPIO, SPI, I2C and UART, etc. You can al...
GL-iNet Flint 2 - Peformance Test: WAN to LAN, WiFi, VPN Throughput
Просмотров 6 тыс.5 месяцев назад
In the previous video, we already took a look at the GL-iNet Flint 2 (GL-MT6000). In this video, let's check out the device's performance by running the below tests: - WAN to LAN throughput test with OpenSpeedTest and iPerf3 - Hardware Acceleration ON vs OFF - Wireless (WiFi) Throughput in 5GHz channel - OpenVPN Throughput - Wireguard Throughput Check out the Flint router: link.gl-inet.com/VanT...
GL-iNet Flint 2 - WiFi 6 AX6000, 2.5GbE Router - Overview, Setup and Speed Test
Просмотров 12 тыс.5 месяцев назад
Flint 2 (GL-MT6000) is a high performance WiFi 6 router from GL-iNet. Powered by the MediaTek Filogic 830 (MT7986), the Flint 2 integrated a 4 cores, 64-bit CPU clocked at 2.0GHz. It is also comes with 1GB of DDR4 RAM and 8GB of eMMC storage For I/O, the Flint 2 has 2 x 2.5 Gigabit Ethernet port, 4 x Gigabit Ethernet port, 6000 Mbps WiFi througput in total (AX6000) and a USB 3.0 port. The devic...
Raspberry Pi 5 - Official OpenWrt Support Firmware Throughput Test
Просмотров 6 тыс.6 месяцев назад
Finanlly, the Raspberry Pi 5 received official OpenWrt support. In this video, I will run a simple WAN to LAN throughput test with OpenSpeedTest and iperf3. Since the Raspberry Pi 5 only has 1 network port, I used a USB 3.0 to Ethernet adapter as the WAN interface. For this test, I used 2 USB to Ethernet adapter: - D-Link DUB-1213 USB 3.0 to Gigabit Ethernet Adapter (ASIX AX88179) - No-Brand US...
Raspberry Pi 5 - OpenWrt Install & Performance Test
Просмотров 13 тыс.7 месяцев назад
In this video, I am going to install OpenWrt on the Raspberry Pi 5. After that, let's have some performance tests, including WAN to LAN throughput with OpenSpeedTest and iPerf3, OpenVPN and Wireguard VPN throughput. Since the Raspberry Pi 5 only has 1 x Ethernet port, I used the D-Link DUB-1312 USB to Ethernet adapter as the WAN port. The onboard Ethernet port was configured as LAN. OpenWrt for...
FriendlyElec NanoPC-T6 Overview & Quick Test
Просмотров 5 тыс.9 месяцев назад
This video will show you the overview of the NanoPC-T6 - a high performance edge computing Single Board Computer from FriendlyElec. The NanoPC-T6 was built on the Rockchip RK3588 SoC. It comes with an 8-cores CPU: 4 x ARM Cortex-A76 cores & 4 x ARM Cortex-A55 cores, 6TOPS NPU, the Mali-G610 MP4 GPU and the intergrated VPU supports upto 8K video econding & decoding. For connectity, the NanoPC-T6...
Replace ISP ONT/ONU - HSGQ SFP XPON ONU Stick
Просмотров 23 тыс.10 месяцев назад
In this video, we will take a look at the the XPON ONU Stick from HSGQ. The video will walk you through the Web Interface of the XPON ONU Stick and the process of replacing the ISP provided ONT/ONU with this SFP XPON module. (XPON means the SFP supports both GPON and EPON) In this setup, the HSGQ is connected to the 2.5G Media Converter. The RJ45 port of the Media Converter is connected to the ...
Install OpenWrt 23 on Banana Pi R2 PRO & PPPoE Speedtest
Просмотров 6 тыс.10 месяцев назад
In this video, I will show you how to install the latest OpenWrt version on the Banana Pi R2 PRO internal eMMC. (OpenWrt 23.02 snapshot). After that, let's check out the PPPoE throughput with VLAN (packet steering on). OpenWrt 21.02 firmware provided by Banana Pi is out of date and there are problems with DSA, for example VLAN is not working fine. Fortunately, mj22226 and other developers are m...
Linksys WRT1900AC V1 (throughput) is broken after DSA migration (OpenWrt 21/22/23)
Просмотров 3,4 тыс.11 месяцев назад
The Linksys WRT1900AC's throughput is very poor after upgraded to OpenWrt 21, 22 and 23 where DSA replaced swconfig. With OpenWrt 19, the Linksys WRT1900AC V1 can handle Gigabit (940Mbps) WAN to LAN throughput. However, it only does 350/800 Mbps with OpenWrt 21/22/23 (PPPoE). WAN to LAN throughput better for DHCP (780/660 Mbps), but still far away from the expected throughput. For now, the only...
OpenWrt 22.03 - File Sharing with Samba4 - NVMe NAS test with NanoPi R6C
Просмотров 6 тыс.Год назад
In this video, I will show you how to install Samba4 on OpenWrt. For the test, I used the NanoPi R6C, the Intel Optane NVMe SSD (16GB) and a 5V/3A power supply. At the end, we will run a simple disk benchmark test with CrystalDiskMark. At the same time, let's check out the NanoPi R6C's power consumption when the test is running. The video will walk you through: Configure Storage (USB/SSD/HDD/NV...
Setup Zyxel NWA50AX Access Point with Nebula Mobile App
Просмотров 2,2 тыс.Год назад
In this video, I will show you how to setup Zyxel access point with the Nebula Mobile App. For this video, I use the Zyxel NWA50AX; however, the procedure is the same and you can use it for other Zyxel access points. Basically, it is very easy to get your AP setup in just a few minutes: 1. Download the Zyxel Mobile App 2. Sign up or Login with your Zyxel account 3. Scan the QR code on the box t...
Zyxel NWA50AX - Smart Mesh Configuration & Throughput Test
Просмотров 4,8 тыс.Год назад
Zyxel NWA50AX - Smart Mesh Configuration & Throughput Test
Replace ISP ONT/ONU - LEOX LXT-010S-H SFP GPON Module
Просмотров 16 тыс.Год назад
Replace ISP ONT/ONU - LEOX LXT-010S-H SFP GPON Module
Zyxel NWA50AX WiFi 6 PoE Access Point - Overview & Standalone Setup
Просмотров 8 тыс.Год назад
Zyxel NWA50AX WiFi 6 PoE Access Point - Overview & Standalone Setup
OpenWRT - Intel N5105 Router PC WiFi Module Install & Configuration (QCA9880)
Просмотров 7 тыс.Год назад
OpenWRT - Intel N5105 Router PC WiFi Module Install & Configuration (QCA9880)
Configure the EdgeRouter X SFP with Nokia G-010S-A GPON module
Просмотров 13 тыс.Год назад
Configure the EdgeRouter X SFP with Nokia G-010S-A GPON module
Configure Cellular Data (4G/LTE/3G) on GL-iNet Routers
Просмотров 10 тыс.Год назад
Configure Cellular Data (4G/LTE/3G) on GL-iNet Routers
OpenWRT - Intel N5105 Router PC LTE/4G Module Install & Configuration (QMI Mode)
Просмотров 13 тыс.Год назад
OpenWRT - Intel N5105 Router PC LTE/4G Module Install & Configuration (QMI Mode)
Beryl AX Real Life WiFi Performance Test (GL-MT3000)
Просмотров 3,4 тыс.Год назад
Beryl AX Real Life WiFi Performance Test (GL-MT3000)
2Gbps WiFi Throughput with GL-iNet Beryl AX (GL-MT3000)
Просмотров 9 тыс.Год назад
2Gbps WiFi Throughput with GL-iNet Beryl AX (GL-MT3000)
NanoPi R6C - Power Consumption & Throughput Test
Просмотров 4,8 тыс.Год назад
NanoPi R6C - Power Consumption & Throughput Test
The NanoPi R5S - 2.35Gbps WAN to LAN Throughput
Просмотров 6 тыс.Год назад
The NanoPi R5S - 2.35Gbps WAN to LAN Throughput
Replace ISP ONT/ONU - Ubiquiti UFiber LOCO - Overview & Configuration
Просмотров 48 тыс.Год назад
Replace ISP ONT/ONU - Ubiquiti UFiber LOCO - Overview & Configuration
NanoPi R6C - Overview, Quick Setup & 1Gbps Throughput Test
Просмотров 7 тыс.Год назад
NanoPi R6C - Overview, Quick Setup & 1Gbps Throughput Test
I use the TP-Link XZ000-G3 with a different ISP
Просмотров 12 тыс.Год назад
I use the TP-Link XZ000-G3 with a different ISP
Usb 3.0 ssd is good but! It need to be test with work wifi 2.4. And see how its work both. 🤔
Ntfs on Linux is usually slow A good alternative would have been to use extfat or fat32 Those two are also natively supported by windows, so you would have been able to prepopulate files from the pc before sharing with the router This router is great 😊
Not see any different with ntfs and ext4 on router. But any way use ex4 just in case.
ExFat does NOT work properly with the USB port on this router.
@@_Tualatin_ ext4 is faster on router
That's not bad for a router!
Yup, this is pretty fast. It is almost the same with the result on the NanoPi R6C, where the M.2 NVMe SSD is connected to the SBC via the M.2 PCIe port. ruclips.net/video/LwCyzIiexfs/видео.htmlsi=_DJw3iud2-l9ghtM
ad hướng dẫn up bản mới không cần uboot đi
You probably have to reboot the router after changing any of those settings. Hardware offloading only works on MT7610 chipsets like I am sending this through. I have been having youtube hangs so I turned off packet steering and it looks promising but I need more tests.
Dude you saved me. I wanted to install OpenWRT on a computer system and I couldn't provide an ethernet network card for the motherboard, but I use this switch instead, which made my job easier.
Hello, I installed it and connected it to the Zyxel FWA505 router via 1Gbps LAN cable. downloading it gives me the full speed that the Cira 700Mbps router gives me, but uploading the speedtest is slow about 2Mbps. Connecting the PC to the uploaded router I have about 100Mbps, connecting to the access point I have 2Mbps, but downloading instead it's all right. Can you tell me what the problem might be? Thank you!
Hi, to be honest, I have never seen such issue before. Did you replace the Ethernet cable, or simply swap/use the Ethernet cable that which was connected to the PC, and connect to the NWA50AX instead? After that, measure the speed you have. - If the upload speed still slow with the NWA50AX, it is something to work on. Maybe you can try to check if there is newer firmware to upgrade, or reset the configuration and to it from scratch, - If the speed is normal, it the problem with your cable. - The last step could be contact Zyxel support for further help. If you need any help, just let me know.
Please let me marry your brain!
how xpon is authorised?
thank you for this video 👍
@VanTechCorner My internet connection is 1600mbps/45mbps. My ISP is going to be increasing the upload soon. I have a 2.5gb modem. What router would you recommend out of all the ones you have tested so far?
So, you will need a router that has 2.5GbE WAN & LAN. Do you need WiFi 6 as well? - 2.5GbE, WiFi 6 router, based on OpenWrt: GL-iNet Flint 2 - Pure router, powerful with 8 cores, 2.5GbE ports: NanoPi R6S - Router, powerful with 8 cores, MiniPCIe & M.2 for WiFi & LTE: NanoPC-T6 - Router, 2.5GbE, WiFi6, with closed source, but good performance: Zyxel USG LITE 60AX
@@VanTechCorner Thank you for your response. Yes, I need WiFi 6. I think I will go ahead and get the Flint 2. I am only using the router for home use. All the wireless devices will be close to the router. The furthest wireless device will be about 20ft from the router with two walls between seperating them. I was using two Deco W6000 which worked good. However, they are only 1gbe ports. My son had cable internet 800mbps. I will give those to him since he needs better WiFi when the Flint 2 arrives. Thanks again for your recommendations. I love your channel. I have been watching your videos for a long time 😉 I forgot to ask do you use stock firmware on your Flint 2 or do you flash OPENWRT?
Có phát wifi không dây đồng thời được không ạ? Hay cần thêm 1 router khác ạ?
Chào bạn, con này bạn cần trang bị module WiFI qua Mini-PCIe mới phát được nha. Hoặc mua riêng các AP.
Hello! Please tell me, is it possible to organize such a connection with this device: provider cable in input lan #1 -> manipulation with traffic on zimaboard, for example, ovpn/vless -> modified traffic output from lan #2 to the router? I'm afraid to buy in vain.. I would be grateful for an answer. Thanks in advance
Hi, basically you want a VPN router, that turn all your LAN devices connection to the VPN server, is that correct?
OMG HOW IS THIS POSSIVLE? NO FUCKING ADS ❤❤❤
thx
Hello sir after insert open wrt my unifi uap lr is reboot problem and no ping coming to default ip address
If using the WRT1900ACSv2, you can get the Stock firmware from Linksys Support, Use the GUI upgrade on OpenWRT 21/22/23/34 to revert to Stock. From there, use the Linksys GUI to reinstall OpenWRT 19. It's unfortunate that DSA has this impact on speeds.
I followed every direction and it didn’t work. Network would show up on phone, but would have no connection.
doesnt work it says WAN is offline even though im literally using that to write this comment. the fallback is unplugged. update: nvmd, the interface names in LUCI can differ form those in /etc/config/network. i fixed it by changing WAN to wan.
How to change imei?
Mình cài lên edge router x sfp xong cài lộn file sysupgrade nó k lên nữa, giờ có cách nào cài lại không bác
Có nha bạn, bạn có thể làm theo hướng dẫn Recovery của UBNT. Hoặc là phải tháo ra, dùng USB TTL để nạp lại firmware từ uboot.
Can we use gpon without mac and change the router mac instead?
Is there gpon 10g?
How to know pppp password?
I have a cheap raspberry pi zero w from aliexpress running for years all days
no working luci in the last images
2024 and it works for Hotlink omg, thank you so much for making this one, I have no idea why would hotlink capped my hotspot but I really appreciate this🫡
Do u know that u connected SC-APC patch cord to SC-UPC SFP module? Not so critical, but still, a some drop in dB will be present.
i succesfully config everything but, why the transfer rate only 5MB/s on USB 3.0 an gigabit network? i used linksys ea7500 v2
What is the format of the partition, is it ntfs or ext4. I have seen pool performance with ntfs/fat format.
@@VanTechCorner it's ntfs, it fixed when i changed to ext4
My provider offers internet at a specific VLAN and VOIP over another VLAN, how to configure that?
why was the speed 200 MB on the computer when I started the vpn connection, and when I installed it on the router, the speed on the same PC dropped to 20 MB? It's the same on Wi-Fi, from 60 to 15 MB
How I can know the pppoe password inside the isp onu if isp will not tell me?
can i do it without removing the lan1 port from br lan? i wanna use it for normal lan usage and guest wlan dhcp for my other APs
man i could kiss you thats how much this helped
Is ( Hisense LTE3415 SCA+ GPON module Transceiver) compatible with 10G sfp+ port in RT-AX89X ASUS router?
Is this Transceiver compatible with 10G sfp+ port in RT-AX89X ASUS router?
Respected Sir, i have installed the OpenWRT on archer C6U and it my bad luct that i am unable to install samba server because the /overlay has not sufficient memory , then i tried to EXTROOT the memory does increase to the external usb HDD but still the samba server does not install saying insufficient memory. i have installed openVPN on the router which is acting as aconnector connected to OPEN-vpn on the web. Kindly Adviceways to increase the Memory. a df-h command gives the following output..Filesystem Size Used Available Use% Mounted on /dev/root 4.3M 4.3M 0 100% /rom tmpfs 58.9M 284.0K 58.7M 0% /tmp /dev/mtdblock4 8.6M 8.1M 540.0K 94% /rom/overlay overlayfs:/overlay 8.6M 8.1M 540.0K 94% / tmpfs 512.0K 0 512.0K 0% /dev
Your video is great by the way I would like to share that our company APTTEK focuses on providing customized and personalized services for our customers. Through our professional production and professional technical support team, the quality of our ONU and OLT products is guaranteed. There is no need to worry about after-sales problems being unattended, we can provide remote technical support services. If you are interested, please contact me in private box. I am looking forward to hearing from you.
Your video is great by the way I would like to share that our company APTTEK focuses on providing customized and personalized services for our customers. Through our professional production and professional technical support team, the quality of our ONU and OLT products is guaranteed. There is no need to worry about after-sales problems being unattended, we can provide remote technical support services. If you are interested, please contact me in private box. I am looking forward to hearing from you.
Gratidão ❤️
I think your video is great by the way,I would like to share that our company APTTEK focuses on providing customized and personalized services for our customers. Through our professional production and professional technical support team, the quality of our products is guaranteed. There is no need to worry about after-sales problems being unattended, we can provide remote technical support services. If you are interested, please contact me in private box. I am looking forward to hearing from you.
I think your video is great by the way,I would like to share that our company APTTEK focuses on providing customized and personalized services for our customers. Through our professional production and professional technical support team, the quality of our products is guaranteed. There is no need to worry about after-sales problems being unattended, we can provide remote technical support services. If you are interested, please contact me in private box. I am looking forward to hearing from you.
I think your video is great by the way,I would like to share that our company APTTEK focuses on providing customized and personalized services for our customers. Through our professional production and professional technical support team, the quality of our products is guaranteed. There is no need to worry about after-sales problems being unattended, we can provide remote technical support services. If you are interested, please contact me in private box. I am looking forward to hearing from you.
Our company APTTEK focuses on providing customized and personalized services for our customers. Through our professional production and professional technical support team, the quality of our products is guaranteed. There is no need to worry about after-sales problems being unattended, we can provide remote technical support services. If you are interested, please contact me in private box.I am looking forward to hearing from you.
This R6C is not supported by OpenWrt and cant install V2Ray
I need to point that: dont use Friendly download, I downdoded the imaging sodftware from its link, it altered my program and features, I had to restore previous version of my windows
My MR6400 v3.1 is bricked while updating firmware. No LED is blinking. Can you help me recovering it using UART module?
How can I configure a TPlink extender (openwrt) with a single Lan port to provide different private IP addresses for clients wirelessly? My internet connection is wired which is different IP series that should not be assigned for clients
Great video, lots of tests! Thanks 🤝
would love to see this setup on a pfsense netgate appliance